Symetrix 528E Voice Processor Bedienungsanleitung Seite 3

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 4
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 2
3
QUICK START GUIDE: 528e Voice Processor
Declaration of Conformity
6408 216th Street SW | Mountlake Terrace, WA 98043 USA
T +1.425.778.7728 F +1.425.778.7727 | www.symetrix.co
Declaration of Conformity
We, Symetrix Incorporated, 6408 216th St. SW, Mountlake
Terrace, Washington, USA, declare under our sole
responsibility that the product:
528E Voice Processor
to which this declaration relates, is in conformity with the
following standards:
IEC 60065, EN 55103-1, EN 55103-2, FCC Part 15
The technical construction file is maintained at:
Symetrix, Inc.
6408 216th St. SW
Mountlake Terrace, WA, 98043 USA
The authorized representative located within the European
Community is:
World Marketing Associates
P.O. Box 100
St. Austell, Cornwall, PL26 6YU, U.K.
Date of issue: March 15, 1999
Place of issue: Mountlake Terrace, Washington, USA
Authorized signature:
Dane Butcher, President, Symetrix Incorporated.
Rear Panel Connection / Setting
Output Connect to input of console, tape
recorder, etc.
Line Input Connect line-level source here.
Mic Input Connect microphone here.
Phantom Power Depress if mic requires
phantom powering.
Connections
Connect a Mic or Line level source to the appropriate input connector
on the rear of the 528E. Be sure to set the Mic / Line switch to the
appropriate position and be sure to turn on phantom power if using a
microphone that requires it. Next, connect the appropriate output of the
528E to your monitoring system or mixing console. Finally, connect the
528E to an AC source of the proper voltage and frequency as marked
on the rear of the unit.
Caution: Failure to connect the 528E to the proper AC mains voltage
may cause fire and/or internal damage.
Warning: Lethal voltages are present inside the chassis.
There are no user serviceable parts inside the chassis. Refer
all service to qualified service personnel or to the factory.
If you are using a condenser microphone, refer to
“Phantom Powering Condenser Microphones” before depressing the
Phantom Power switch.
Seitenansicht 2
1 2 3 4

Kommentare zu diesen Handbüchern

Keine Kommentare